English –
5
EN
• Packaging material must be disposed of in full observance of current local
legislation.
• Take care to conserve this manual to facilitate future programming or mainte-
nance of the product.
2.
1 –
PRODUCT DESCRIPTION AND INTENDED USE
“MAX” is a line of Nice s.p.a. tubular motors, designed to automate the move-
ments of roller shutters, awnings and sun screens.
TO-MAX
is the
electronic
element
of this line that controls the limit switches and the movement of the
‘motor-driven mechanism’
.
Any use other than as specified herein is to be considered improper and is
strictly prohibited! Any other use is considered improper and strictly prohib-
ited! The manufacturer denies all liability for damage deriving from improp-
er use of the product and use other than as specified in this manual.
“MAX” is a range of Nice tubular motors, designed for the automation of rolling
shutters, sun awnings and sun screens. These modules are divided into two
categories (
Fig. 2
); that of the
motor-casing
, related to the motor only, and that
of the
electronic head
, related to the component that powers and controls the
“motor-driven” mechanism.
The tubular motor, which is obtained through the assembly of these two com-
ponents
(electronic head + motor casing)
, is installed inside the roller of the
roller shutter/awning and is secured to the wall by means of a “snap connec-
tion” between the outer face of To-Max and a special support bracket.
Thanks to its built-in devices (control unit and Encoder technology), To-Max elec-
tronic head can move the rolling shutter/awning both up and down and control
the intermediate positions. In particular, the encoder guarantees a precise and reli-
able electronic control of all limit switches and roller shutter/awning movements.
The tubular motor is connected to the electrical mains and a wall-mounted
switch (not included in the pack) to enable control of the
Up
and
Down
move-
ments of the shutter. The travel limits for these 2 manoeuvres can be pro-
grammed using one of 3 procedures available, depending on the type of shut-
ter to be automated.
To-Max is equipped with a safety system named “
Obstacle detection
” which
is activated when shutter travel, either
Up
or
Down,
is blocked inadvertently by
an obstacle (object, person etc.) or excessive friction (formation of ice, expan-
sion of materials etc.). In these situations, the control unit stops the manoeuvre
immediately and activates a brief inversion of movement.
To-Max is available in various versions, each designed to manage a specific
motor torque (power).
1
KNOWLEDGE OF THE PRODUCT AND
PREPARATION FOR INSTALLATION
2
2
A
(motor-casing)
B
(electronic head)
