4
www.hysecurity.com
SLIDESMART CNX 15 BASIC MANUAL
MX4779 REV. A ©2019
IMPORTANT SAFETY INSTRUCTIONS
Hazards, associated with automatic gates,
can be reduced with proper site design,
installation, and use. Installers, maintenance
crews, and owners/users must read and
follow the safety requirements found in
HySecurity® product manuals.
It is important that only qualifi ed installers
handle installation of HySecurity Gate
vehicular gate operators. A “qualifi ed”
installer has one of the following:
1. A minimum of three years experience
installing similar equipment.
2. Proof of attending a HySecurity Technical Training
seminar within the past three years.
3.
Signifi cant manufacturer endorsements of technical
aptitude in gate operator installation and operation.
Underwriter Laboratories (UL) and the American Society
for Testing and Materials (ASTM) are responsible for
current safety standards and regulations regarding gate
operators and automated gates. All aspects of gate
installation must comply with the appropriate safety
standard. For the most up-to-date ASTM F2200 Gate
and Fence Standards, refer to www.astm.org. For UL
325 Safety Standard, refer to www.ul.com. Consult local
government agencies for up-to-date rules and regulations
as certain municipalities have established licensing, codes
or regulations that regulate automated gate system
design and installation.
GENERAL SAFETY INFORMATION
A gate operator is only a component in a gate system.
The other parts of the gate system can include the
gate, the external safety sensors, access controls, and
vehicle detectors. To have a gate system that provides
for safety, security, and reliable operation it is essential
these components operate together as a system. It is
the responsibility of the system designer and/or installer
to ensure any safety or operational issues have been
addressed.
WARNING
To reduce the risk of injury or death:
1.
READ AND FOLLOW ALL INSTRUCTIONS.
2. Never let children operate or play with gate controls.
Keep the remote control away from children.
3. Always keep people and objects away from the
gate. NO ONE SHOULD CROSS THE PATH OF THE
MOVING GATE.
4. Test the gate operator monthly. The gate MUST
reverse on contact with a rigid object or stop when
an object activates the non-contact sensors. After
adjusting the force or the limit of travel, retest the
gate operator. Failure to adjust and retest the gate
operator properly can increase the risk of injury or
death.
5. Use the emergency release only when the gate is not
moving.
6.
KEEP GATES PROPERLY MAINTAINED. Read the
user’s manual. Have a qualifi ed service person make
repairs to gate hardware.
7. The entrance is for vehicles only. Pedestrians must
use separate entrance.
8.
SAVE THESE INSTRUCTIONS.
SAFETY REQUIREMENTS