Settings
VVM 240
6
Heating control system
The indoor temperature depends on several factors.
During the hot season, solar radiation and heat given
off by people and equipment are sufficient to keep the
house warm. When it gets colder outside, the heating
system must be started. The colder its gets, the hotter
the radiators must be.
This adjustment is made automatically, however the
basic settings must first be made on the boiler, see the
section Room temperature - Default setting.
The Curve coefficient is set using menu 2.1 and with
the Offset heating curve knob.
If you do not know the correct settings, use the basic
data from the map opposite.
If the required room temperature is not obtained, read-
justment may be necessary.
NOTE!
Wait one day between settings so that the tem-
peratures have time to stabilise.
Readjustment of basic settings.
Cold weather conditions
When the room temperature is too low, the heating
curve value is increased in menu 2.1 by one incre-
ment.
When the room temperature is too high, the heating
curve value is decreased in menu 2.1 by one incre-
ment.
Warm weather conditions
If the room temperature is low, increase the offset
heating curve setting by one step.
If the room temperature is high, reduce the heating
curve offset setting by one step.
Default setting
Offset heating
curve
Menu 2.1 Curve coefficient
9
C u r v e c o e f f i c i e n t
2 . 1
