2
TemBreak
PRO
P_SE-UM-001-EN
– V1.2.0
Using this manual
Safety Precautions
Authorised Personnel Only
The product or system described in this documentation must be installed, operated and maintained by qualified personnel only. NHP or Terasaki accept no
responsibility for the consequences of the use of this equipment by unqualified personnel.
A qualified person is one with the necessary skills and knowledge of the construction and operation of the installation of electrical equipment and has been
trained to identify and avoid risks.
Appropriate use of NHP / Terasaki products
NHP / Terasaki products are intended to be used only for the applications described in the catalogue and technical documentation, which is dedicated to
them. If products and components from other manufacturers are used, they must be recommended or approved by NHP or Terasaki.
Appropriate use of NHP / Terasaki products during transport, storage, installation, assembly, commissioning, operation and maintenance is necessary to
ensure safe operation and without any problems.
The permissible ambient conditions must be met. The information contained in the technical documentation must be observed.
Publication of responsibility
The contents of this document have been reviewed to ensure that the reliability of the information is correct at time of publication.
NHP or Terasaki are not responsible for printing or damage resulting from errors. NHP or Terasaki reserve the right to make corrections and changes
needed in subsequent edition.
Warnings and notes
This documentation contains safety instructions that you must follow for your personal safety and to prevent damage to property.
Safety instructions, referring to your personal safety are reported in the literature by a safety alert symbol.
Safety warning symbols and the words below are classified according to the degree of risk.
WARNING
: Indicates an imminently hazardous situation which, if it cannot be avoided, will result in death or
serious injury.
WARNING
: Indicates a potentially hazardous situation which, if it cannot be avoided, can result serious injury or
death.
WARNING
: Indicates a potentially hazardous situation which, if it cannot be avoided, may cause minor or
moderate injury.
Notice
: Indicates a warning of property damage and can also indicate important operating and especially useful
information on the product, that it should pay particular attention to efficient and safe operation.
Summary of Contents for Terasaki TemBreak PRO P SE Series
