NF WF1945B, Instruction Manual

Page: 72 / 188

4.1 Burst oscillation
4-10
WF1945B
Operation:
(1) Set burst oscillation TYPE to GATE.
① Press the
MODE
key, then the
BURST
key.
② Use the and keys to produce the following display (TYPE flashes).
ＢＵＲＳＴ ＴＲＩＧ ＧＡＴＥ
4
ＢＵＲＳＴ：ＴＹＰＥ ＭＡＲＫ ＳＰＡＣＥ ＳＴＯＰ―ＬＥＶＥＬ
③ Press the
ENTER
key, then produce the following display with the and keys
(GATE flashes).
ＢＵＲＳＴ ＴＲＩＧ ＧＡＴＥ
4
ＧＡＴＥ：ＴＹＰＥ ＳＯＵＲＣＥ ＳＴＯＰ－ＬＥＶＥＬ
④ This sets the burst oscillation type for gate.
Press the
EXIT
key once to release the type setting mode.
(2) Select gate SOURCE
① Use the and keys to produce the following display (SOURCE flashes).
ＥＸＴ Ｌ－ＯＮ
ＧＡＴＥ： ＴＹＰＥ ＳＯＵＲＣＥ ＳＴＯＰ－ＬＥＶＥＬ
② Press the
ENTER
key.
③ Press the key, then select positive logic (H-ON) with the
MODIFY
dial.
④ After setting, press the
EXIT
key to release the setting mode.