NF WF1945B, Instruction Manual

Page: 67 / 188

4.1 Burst oscillation
WF1945B
4-5
„
Burst oscillation (Type: Trigger) (
MODE
→
BURST
→
TYPE : TRIG)
Burst oscillation (Type: Trigger) produces an intermittent oscillation output at a designated cycle at each
trigger signal.
Operation is described with reference to an example of producing a waveform output such as indicated in
the figure in response to an external trigger (
).
The example is a triangular waveform, DC offset 0 V, frequency and amplitude arbitrary.
Operation:
(1) Set the burst oscillation TYPE to TRIG.
①
Press the
MODE
key, then the
BURST
key.
②
Use the and keys to select the type (TYPE flashes).
ＢＵＲＳＴ ＴＲＩＧ ＧＡＴＥ
4
ＢＵＲＳＴ：ＴＹＰＥ ＭＡＲＫ ＳＰＡＣＥ ＳＴＯＰ―ＬＥＶＥＬ
③
Press the
ENTER
key, then produce the following display with the and keys
(TRIG flashes).
ＢＵＲＳＴ ＴＲＩＧ ＧＡＴＥ
4
ＴＲＩＧ：ＴＹＰＥ ＳＯＵＲＣＥ ＤＥＬＡＹ ＭＡＲＫ
4
④
This sets the burst oscillation type to trigger. Press the
EXIT
key to exit type setting.