NF WF1945B, Instruction Manual

Page: 33 / 188

3.1 Panel description
WF1945B
3-3
„
Front panel
Tr
igger
/s
w
eep input
c
onnec
to
r (
page 3-9)
Sync signal outpu
t
c
onnec
to
r (
page 3-6)
Waveform output
connector
(page 3-5)
Memory save, recall, etc. (page 5-13)
Power on/off. Depress for
power
on,
press
and release to raised position for power off.
Frequency and amplitude setting (pages 3-21 to 3-23)
Oscillation mode
selection
(page 3-19)
Displays frequency, amplitude, offset and load impedance
settings,
in addition to information
to assist when setting.
Lamps
light to indicate present oscillation
mode and waveform selection.
Lamp lights to indicate output range. When the range is set for autom
atic
switching, the Auto
lamp lights (page 5-18). The OVER lamp
flashes
when the output voltage
exceeds the upper limit (page 3-5).
Output waveform
on/off.
Key
lam
p
lights when on, exti
nguishes when off.
Key button, top or
bottom
lamps
light
only for operable keys.
When Modify lamp lights, turn dial to set values or parameters. Return to the previous step. Undo key (page 5-21)
Setting initialize (p
age 3-16), output range
setting (p
age 5-18), user unit setting (p
age 5-9)
Waveform select (page 3-20)
Press to enter, e.g., a numerical input.