17
Swimming pool
volume
Production
percentage
0 to 40 m3
30-50%
40 to 60 m3
50-80 %
60 to 100 m3
80-120 %
100 to 120 m3
120 to 135%
120 to 160 m3
135 to 160 %
4.3.2 Production percentage setting
procedure
Production is regulated by keeping the
P key pressed down and using the +/- keys,
and the percentage increases or decreases in
5% increments over a 30 to 180% range.
Warning: as the production is regulated in
cover mode, you need to validate the position
of the cover before setting (see Chapter 4.5)
to be certain to adjust the production
percentage in normal mode, green LED on -
cover open.
4.4 Automatic Operation or Forced
Operation
4.4.1 Display – Operating Forced
operation
Forced operation uses the maximum power of
the electrolyser to carry out shock
chlorination.
Reminder: this shock chlorination is only
intended to treat situations where water
quality has been lost and under no
circumstances should become the normal
mode. It must only be used to manage periods
of very high use of treatments or to resolve a
situation where treatment has not been
carried out enough.
To optimise this Shock Chlorination, the
pH must be adjusted to between 6.9 and 7.4
beforehand.
The filtration box must also be in manual
operation position for 24 hours to guarantee
the continuity of this shock treatment.
4.4.2 Procedure to enable and disable
forced running
Forced operation is activated by pressing
on the Forced Operation key (F key) for 5
seconds. The red Forced Operation light
comes on and the "Forced Operation" text
appears. The production then changes to
200%.
Leave the equipment to operate for a
maximum of 24 hours, and carry out manual
analysis of the level of chlorine, in order to
stop the shock chlorination if necessary and
revert back to automatic mode.
To stop the Forced Operation, you need
to press on the Auto Operation key (key A) for
at least 5 seconds.
Comment: forced operation will disconnect
automatically after 24 hours of operation to
revert back to automatic mode.
The forced operation can be deactivated at any
time by pressing on the Automatic Operation
key (A key) for at least 5 seconds
Held down
5 sec.
5 sec.
Summary of Contents for STERILOR Duo
Page 2: ...2 ...
