Nexo NXAMP4x1mk2, User Manual

Page: 37 / 70

OPTIONS
NXAMPMK2 USER MANUAL PAGE 37 / 70
If the Analog fallback mode is ON, and the audio from Network (Dante TM , AES/EBU or Ethersound TM ) is
missing, the NXAMPmk2 will display the following message:
•
When used with NXDT104mk2. Detection of a valid audio network when using NXDT104mk2 is based
on audio subscription. It means that the NXDT104mk2 is checking if audio packets from the Dante
TM
Transmitter(s) are received correctly. If the network fails somewhere (cable removed, transmitter
switched off or excessive packet loss), the analog inputs will be unmuted, even if the NXAMPmk2 is still
connected to the network and the remote control is still working.
If for example, the NXAMPmk2 n°2 does not received the audio packets from the subscribed source
(here the mixer) then it will unmute the analog inputs, as shown below.
The name of the subscribed transmitter(s) can be checked into the Dante
TM
Controller, on
“Device View.
On the below picture, we can see for example that the NXAMPmk2 with the
Dante™ card name “Y01 -
NEXO-NXAMP4x4mk2-
062c60” has subscribed to channel 01, 02, 0 and 0 from the Dante
TM device
named “NEXO-PC” (a computer running the Dante
TM
Virtual Soundcard software).
NB: The NXDT104mk2 can subscribe up to four different channels from four different Dante TM
transmitters.
ANA IN
ANA IN
ANA IN
ANA IN
NXAMP 1
NXAMP 2
NXAMP
NXAMP
ANA OUT
Dante
Digital
Mixer
Dante
Dante
Dante
Dante
Network
(Dante device,
non Dante devices,
Switches, ...)
ANA IN
ANA IN
ANA IN
ANA IN
NXAMP 1
NXAMP 2
NXAMP
NXAMP
ANA OUT
Dante
Digital
Mixer
Dante
Dante
Dante
Dante
Network
(Dante device,
non Dante devices,
Switches, ...)