Newland NLS-NVH200, User Manual

Page: 211 / 253

Enter Setup
197 ** Exit Setup
Search Commands
F8 Search forward for a character
Syntax
＝
F8xx (xx: The search character
’
s hex value)
Search the input message forward for “xx” character from the current cursor position, leaving the cursor pointing to the “xx”
character.
F8 Example: Send barcode data that starts after a particular character
Search for the letter “D” in barcodes and send all the data that follows, including the “D”. Using the barcode above: Command string:
F844F10D
F8 is the “Search forward for a character” command 44 is the hex value for “D”
F1 is the “Send all characters” command 0D is the hex value for a CR
The data is output as: DEFGHIJ
<CR>
F9 Search backward for a character
Syntax
＝
F9xx(xx: The search character
’
s hex value)
Search the input message backward for “xx” character from the current cursor position, leaving the cursor pointing to the “xx”
character.
B0 Search forward for a string
Syntax=B0nnnnS (nnnn: The string length (up to 9999); S: The ASCII hex value of each character in the string)
Search forward for “S” string from the current cursor position, leaving cursor pointing to “S” string. For example, B0000454657374
will search forward for the first occurrence of the 4 ‐ character string “Test.”
B0 Example: Send barcode data that starts after a string of characters
Search for the letters “FGH” in barcodes and send all the data that follows, including “FGH.” Using the barcode above: Command
string: B00003464748F10D
B0 is the “Search forward for a string” command 0003 is the string length (3 characters)
46 is the hex value for “F” 47 is the hex value for “G” 48 is the hex value for “H”
F1 is the “Send all characters” command 0D is the hex value for a CR
The data is output as: FGHIJ
<CR>