Newland NLS-NVH200, User Manual

Page: 50 / 253

Enter Setup
**
【
Exit Setup
】
36
Pairing settings
Matching of scanner and base
The scanner must be matched with the base to communicate with each other. The same base can be paired with 7 scanners. Users
can manually pair the scanner with the base: in boot state, the scanner is placed on the base, and then press the "M" key on the
base. Paired successful scanners will have voice prompts. If you need to unpair it, you can put the scanner on the base of the pairing,
press the "M" button for 5 seconds, the successful unpairing scanner will have a sound prompt. It can also be cleared by scanning
the following clear pairing code. If the scanner needs to be paired with another pedestal, it can be paired with another pedestal
directly.
Wireless scanner clears pairing information
Find Paired Scanner
Under the boot state, press the "M" button on the base, and the scanner matching the base will give voice prompts.
Power off
It has been a long time that you have not used the device or it is under transportation process, it will be power off.
Power Off