Newland NLS-NVH200, User Manual

Page: 43 / 253

29
Good Read Delay
Good Read Delay sets the minimum amount of time before the scanner can read
another barcode. Scan the appropriate barcode below to enable or disable the delay.
Enable
** Disable
Good Reread Delay timeout
This parameter is programmable in 1ms increments from 1ms to 3,600,000ms. The
default setting is 500ms.
Good Read Delay
Set the good read delay to 1,000ms,
1. Scan the Enter Setup barcode.
2. Scan the Good Read Delay barcode.
3. Scan the numeric barcodes “1”, “0”, “0” and “0” from the “Digit Barcodes”
section in Appendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.