Newland NLS-NVH200, User Manual

Page: 100 / 253

Enter Setup
**
【
Exit Setup
】
86
EAN ‐ 13 Beginning with 378/379 Add ‐ On Code Required

Require Add ‐ On Code: All EAN ‐ 13 barcodes that begin with a “378” or “379” must have a 2 ‐ digit or 5 ‐ digit add ‐ on code. The
EAN ‐ 13 barcode with the add ‐ on code is then transmitted. If the required add ‐ on code is not found, the EAN ‐ 13 barcode is
discarded.

Do Not Require Add ‐ On Code: If you have selected Require Add ‐ On Code, and you want to disable this feature, scan Do Not
Require Add ‐ On Code. EAN ‐ 13 barcodes are handled, depending on your selection for the “Add ‐ On Code Required” feature.
** Do Not Require Add ‐ On Code
Require Add ‐ On Code
EAN ‐ 13 Beginning with 414/419 Add ‐ On Code Required
This setting programs the scanner to require an add ‐ on code (2 ‐ digit or 5 ‐ digit) on EAN ‐ 13 barcodes that begin with a “414” or
“419”. The following settings can be programmed:

Require Add ‐ On Code: All EAN ‐ 13 barcodes that begin with a “414” or “419” must have a 2 ‐ digit or 5 ‐ digit add ‐ on code. The
EAN ‐ 13 barcode with the add ‐ on code is then transmitted. If the required add ‐ on code is not found, the EAN ‐ 13 barcode is
discarded.

Do Not Require Add ‐ On Code: If you have selected Require Add ‐ On Code, and you want to disable this feature, scan Do Not
Require Add ‐ On Code. EAN ‐ 13 barcodes are handled, depending on your selection for the “Add ‐ On Code Required” feature.
** Do Not Require Add ‐ On Code
Require Add ‐ On Code