Newland NLS-NVH200, User Manual

Page: 187 / 253

Enter Setup
173 ** Exit Setup
Set Length Range for Maxicode
The scanner can be configured to only decode Maxicode barcodes with lengths that fall between (inclusive) the minimum and
maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
Set the Maximum Length (Default:150)
The maximum length limit of any two ‐ dimensional bar code shall not exceed 65535 bytes, and the maximum
length limit shall not be less than the minimum length limit.
If you want to read only a fixed length Maxicode barcode, you can set the minimum length limit to be equal
to the maximum length limit.
Set the scanner to decode Maxicode barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode “8” from the “Digit Barcodes” section in Appendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes “1” and “2” from the “Digit Barcodes” section in Appendix.
7. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
8. Scan the Exit Setup barcode.