Newland NLS-NVH200, User Manual

Page: 44 / 253

30
Vibrate Setting
Good Read Vibrate
On ** Off
Vibrate Duration
This parameter is programmable in 1ms increments from 100 to 2000ms, the default setting is 300ms.
Good Read Vibrate Duration
Image Decoding Timeout
Image Decoding Timeout specifies the maximum time the scanner will spend decoding an image. This
parameter is programmable in 1ms increments from 1ms to 3,000ms. The default timeout is 350ms.
Image Decoding Timeout
Set the image decoding timeout to 800ms:
1. Scan the Enter Setup barcode.
2.
Scan the Image Decoding Timeout barcode.
3. Scan the numeric barcodes “8”, “0” and “0” from the “Digit Barcodes” section in
Appendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.