Newland NLS-FR40, User Manual

Page: 22 / 144

【
Enter Setup
】
**
【
Exit Setup
】
12
Chapter 2 System Settings
Introduction
There are two ways to configure the FR40 scanner: barcode programming and command programming.
Barcode Programming
The FR40 scanner can be configured through scanning a number of programming barcodes. In the following sections, we
will explain the available options and features and provide the barcodes to program them.
This programming method is straightforward. However, it requires manually scanning barcodes. As a result, errors are
likely to occur.
Command Programming
The FR40 scanner can also be configured by command strings sent from the Host. In the following sections, the
commands will be provided along with programming barcodes.
Users can also develop an application to send those command strings to their scanners.