Newland NLS-FR40, User Manual

Page: 121 / 144

【
Enter Setup
】
111 **
【
Exit Setup
】
Custom Prefix
Enable/Disable Custom Prefix
If custom prefix is enabled, you are allowed to append before the scanned data a user-defined prefix that cannot exceed 10
characters. For example, if the custom prefix is “AB” and the scanned data is “123”, the Host will receive “AB123”.
**
【
Disable Custom Prefix
】
【 Enable Custom Prefix 】
Set Custom Prefix
To set a custom prefix, scan the Set Custom Prefix barcode, the numeric barcodes corresponding to the hexadecimal
value of a desired prefix and the Save barcode.
Note: A custom prefix cannot exceed 10 characters.
【
Set Custom Prefix
】
Set the custom prefix to “CODE” (its hexadecimal value is 0x43/0x4F/0x44/0x45):
1. Scan the Enter Setup barcode.
2. Scan the Set Custom Prefix barcode.
3. Scan the numeric barcodes “4”,“3”,“4”,“F”,“4”,“4”,“4” and “5”.
4. Scan the Save barcode.
5. Scan the Enable Custom Prefix barcode.
6. Scan the Exit Setup barcode.