Newland NLS-FR40, User Manual

Page: 30 / 144

【
Enter Setup
】
**
【
Exit Setup
】
20
Chapter 4 Scan Mode
Sense Mode
If the Sense mode is enabled, presenting a barcode to the scanner activates a decode session. The session continues until
the barcode decodes or the decode session timeout expires or the barcode is moved away from the scanner. Holding down
the left or right trigger on the scanner can also activate a decode session. The presence of obstacle between the scanner
and barcode can affect the trigger distance.
**
【
Sense Mode
】
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. If the timeout expires or the
barcode decodes, the decode session stops. It is programmable in 1ms increments from 0ms to 3,600,000ms. The default
setting is 3,000ms.
【
Decode Session Timeout
】
Example: Set the decode session timeout to 1500ms
1. Scan the Enter Setup barcode.
2. Scan the Decode Session Timeout barcode.
3. Scan the numeric barcodes “1”, “5”, “0” and “0”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode.