Newland NLS-FR40, User Manual

Page: 39 / 144

【
Enter Setup
】
29 **
【
Exit Setup
】
Chapter 6 USB Interface
Introduction
There are two options for USB connection.
 USB HID-KBW: The scanner’s transmission is simulated as USB keyboard input with no need for command
configuration or a driver. The barcode data could be entered by the virtual keyboard directly and it is also convenient
for the Host to receive data.
 USB COM Port Emulation: The USB port on the Host is emulated as a RS-232 port with the same data transmission
and configuration as a real RS-232 port. This mode is based on USB DataPipe protocol and thus requires a driver.
USB HID-KBW
When the scanner is connected to the USB port on a Host, you can enable the USB HID-KBW feature by scanning the
barcode below. The scanner’s transmission will be simulated as USB keyboard input. The Host receives keystrokes on the
virtual keyboard. It works on a Plug and Play basis and no driver is required.
**
【
USB HID-KBW
】
If the Host allows keyboard input, then no extra software is needed for HID-KBW input.