Newland NLS-FR40, User Manual

Page: 27 / 144

【
Enter Setup
】
17 **
【
Exit Setup
】
Transmit NGR Message
Scan the appropriate barcode below to select whether or not to transmit a user-defined NGR (Not Good
Read) message when the scanner fails to decode a barcode.
【
Transmit NGR Message
】
** 【 Do Not Transmit NGR Message 】
Edit NGR Message
To edit an NGR message, scan the Edit NGR Message barcode and the numeric barcodes corresponding to the ASCII
values (hex) of desired characters and then scan the Save barcode.
An NGR message can contain 0-7 characters (ASCII value of character: 0x00-0xFF).
【
Edit NGR Message
】
Example: Set the NGR message to “!ERR”
1. Check the hex values of “!ERR” in the ASCII Table. (“!ERR”: 21, 45, 52, 52)
2. Scan the Enter Setup barcode.
3. Scan the Edit NGR Message barcode.
4. Scan the numeric barcodes “2”, “1”, “4”, “5”, “5”, “2”, “5” and “2”.
5. Scan the Save barcode.
6. Scan the Exit Setup barcode.