User Manual MX100E SIP-ISDN Gateway Series
5-26 www.newrocktech.com
Name Description
Retransmit timer
Set the amount of overtime on response after transmission of Radius message, the default is 3
seconds. The retransmission will be performed If no response is given after the timeout.
Retransmit times
Set the times of retransmission of Radius message when no response is received default is 3
times.
Trigger
IP side: when this is selected the call information on the SIP side will be sent to the Radius
server.
IP and TDM side: when this is selected the call information on the SIP side as well as on the
ISDN side will be sent to the Radius server.
CDR type
Outbound: Set whether to send RADIUS charge message for outbound calls;
Inbound: Set whether to send RADIUS charge message for inbound calls;
Answered: Set whether to send RADIUS charge message when calls are connected;
Unanswered: Set whether to send RADIUS charge message for unanswered calls.
5.4.11 Encryption
After login, click the label of
Advanced > Encryption
to open this interface.
Figure 5-19 Encryption Configuration Interface
Table 5-18 Encryption Configuration Interface
Name Description
T.38 encrypt
Choose whether to encrypt T38 data. By default, this is not selected.
RTP encrypt
Choose whether to encrypt RTP voice pack, the default is
0
.
0: No encryption
1: Entire message
2: Header only
3: The data body only
Signal encrypt
Choose whether to encrypt signaling. By default, this is not selected.
Encryption method
Set the gateway encryption method, default is 8. The optional parameters as below:
10: RC4
14: Encrypt14
16: Word reverse(263)
17: Word exchange(263)
18: Byte reverse(263)
19: Byte exchange(263)
20:VOS