User Manual MX100E SIP-ISDN Gateway Series
5-18 www.newrocktech.com
This table is designed to ensure the safe use of gateways. Administrators can add the authorized IP
addresses to this table, and the gateways will only process the information from authorized IP addresses.
If the IP table is empty, the gateways will not perform IP address-based message filtering.
For example: the gateway will only process the messages from 202.96.209.133 after adding
202.96.209.133 to its IP table.
5.4.4 Digit Map
In most situations, dialing rules need to be configured only for second dial on the MX100E.
After login, click
Advanced > Digit
Map
tab to open the dialing rules interface.
Figure 5-12 Configuration Interface for Digit Map
Dialing rules are used to effectively judge if the received number sequence is completed, for the purpose
of ending up receiving numbers and sending out the received numbers. The proper use of dialing rules
can help to reduce the connection time of telephone calls.
The maximum number of rules that can be stored in gateways is 520. The total length of dialing rules
table (the total length of all dialing rules) cannot be more than 3000 bytes.
The following provides a description of typical rules:
Table 5-12 Description of Digit map
Digit map
Description
First digit timer
If a subscriber hasn’t dialed any number within a specified time by this parameter after
offhook, the gateways will consider that the subscriber has given up the call and prompt to
hang up in busy tone. Unit: second, default value: 12 seconds.