User Manual MX100E SIP-ISDN Gateway Series
5-2 www.newrocktech.com
5.2 Buttons Used on Gateway Management Interface
Submit
buttons are at the bottom of the configuration screens.
Submit
Button:
Submit configuration information. Users click
Submit
button after completion of
parameter configuration on a page. A success prompt will appear if configuration information is
accepted by the system; if a “The configuration takes effect after the system is restarted” dialog box
appears, it means that the parameters are valid only after a system restart; it is recommended that users
press the
Restart
button on the Tool page to enable the configuration after changing all parameters to
be modified.
5.3 Basic Configuration
5.3.1 Network Configuration
After login, click
Basic > Network
tab to open the configuration interface.
Figure 5-2 Network Configuration Interface
Table 5-1 Network Configuration Interface
Name Description
Host name
This is the equipment name of a configuration gateway. The default value is MX100E. Users
can set a different name for each gateway to distinguish from each other according to the
deployment plan.
A host name can be a maximum of 48 characters, either letters (A-Z or a-z), numbers (0-9) and
minus sign (-). It may not be null or space and it must start with a letter.
MAC address
Display the MAC address of gateway.
ETH
IP address assignment
Static IP address is used.
IP address
The IP address used by an ETH interface to access the network gateway.
Netmask
The subnet mask is used with an IP address. When the gateways use a static IP address of
ETH, this parameter must be entered.
