User Manual MX100E SIP-ISDN Gateway Series
5-12 www.newrocktech.com
Name Description
BERT
Set the duration, in the unit of seconds, minutes, hours, or days. After that, you can click
Start to view the progress bar and the Stop button, as shown in the following figure.
You can click Stop to cancel the testing process.
Near End Loop Back
Enable the loop back function for the remote device by clicking
Start
.
ISDN-D channel
Display the state of the ISDN-D channel: In service or Out of service.
ISDN-B channel
Displays the indicator state of a specific ISDN-B channel.
If you click the channel in green, the indicator turns yellow and the call from IP to
ISDN on the T1/E1 line is prohibited. The call from ISDN is not affected.
If you click
Block
and choose a specific channel, the indicator of the chosen
channel turns red.
If you click
Unblock
and choose a blocked channel, the indicator of the chosen
indicator turns green.
If you click
Query
and choose a channel, the channel state is refreshed.
If you click
Restart
and choose a channel, the choose channel restarts.
Figure 5-9 ISDN configuration Interface 3
5.4 Advanced Configuration
5.4.1 Routing Table
After login, click
Advanced > Routing Table
tab to open the configuration interface.
