MX100E SIP-ISDN Gateway Series User Manual
www.newrocktech.com 5-21
Name Description
NAT IP address
This parameter must be filled when using static NAT traversal, in which IAD works under
LAN and the WAN address is fixed. The WAN address should be filled in this field, which
will be used in SDP. This parameter can be set in IP address format or hostname format
(note: DNS service should be activated when hostname format is used). There is no default
value for this field.
STUN server
Set the IP or domain name of STUN server. No default value. If the set is empty, the
gateway will adopt the STUN server address configured at factory.
When choosing STUN for NAT traversal, the gateway will carry out STUN operation
periodically according to the configured interval time of NAT refresh.
RTP Receiving Port
The gateways will send the RTP receiving port selected here to the remote side.
NAT port: Use NAT mapped port
，
which is obtained through STUN, for example;
Local port: Use local SIP and RTP port.
Remote management
Remote management
TR069
Auto Provision
Server
Gateways may download software upgrade packages and configuration files automatically
through auto-provision server. Once the auto provision is selected, you have to enter the IP
address of ACS here.
Remote management
Remote management
The gateways support EMS which is a centralized gateway management server provided by
New Rock, and Auto-provision.
5.4.6 Security
After login, click
Advanced > Security
tab to open this interface.
Figure 5-14 Security Configuration Interface
Table 5-14 Security Configuration Parameters
Name Description
Telnet
Choose whether to enable the Telnet function.
Telnet password
The Telnet password consists of 6-20 bit case-sensitive characters (letters, digits, or marks such
as !, @, #, $, %, and ^).
Confirm password
Re-input the Telnet password.
Web server port
Specifies the port number of the Web server. The value is a 2-4 bit digit number.
