- 41 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771
314732-AA-B
Header
Bin 1: Main holding bin for material or Insert. MultApplier and MultiBin inserts (shown on following
pages) are con
fi
gured as Bins 2-4 depending on type used.
Conveyor: Conveys material to rear of unit.
Conveyor Chain Oiler: Use to lubricate conveyor chain strands at the end of each day’s use to prevent
premature component failure.
Cylinder Control Valve Assembly: Contains control valves for all feedgate control cylinders, and spinner
shift cylinders.
Enclosure: Houses spreader control modules and fuse panel.
Feedgate: Adjustable gate mounted into Rear Endgate. Allows for variable rates of material
fl
ow by
moving hydraulic actuator to desired height.
Hillside Divider: Ensures balanced
fl
ow of material across conveyor when on hillsides or uneven terrain.
Inverted “V”: Mounted inside Main Hopper when Insert not installed. Distributes weight pressure
across conveyor, allowing for consistent material
fl
ow to Feedgate, and promotes an improved blend
when spreading fertilizer.
Lift Hooks: Used to lift unit or insert with appropriately rated lifting device.
Material Divider: Ensures uniform spread pattern by directing material off of conveyor onto spinner discs.
Material Divider Back Plate Storage: Storage position for material divider back plate when removed for
spreading lime.
Rear Endgate: Bolt-in endgate furthest from chassis cab (Rear based on direction of travel). Holds
mounted Feedgate, allowing for rear release of material from bin.
Side Stake: Side support for machine walls.
Sight Window: Allows viewing into Bin 1 from remote location, such as from ground or from vehicle cab.
Sill: Base of Main Hopper side walls. Contains Conveyor and supports machine walls.
Spinner Assembly: Contains adjustable G4 Spreader system, consisting of hydraulic spinners used
for dispersal of various materials at different positioned settings allowing for consistent, even spread
patterns across a wide variety of material with a high rate of accuracy.
Spinner De
fl
ectors: De
fl
ect material away from machine.
Spinner Guards: Upper and Lower guards, protects operators from spinner discs. Must be in place
during any operation.
Spreader Control Valve Assembly: Contains control valves for Bin 1 conveyor, spinners and automatic
conveyor tension.
Vane Assembly: Precisely directs material from conveyor to spinner(s) as spinner assembly shifts left or
right.
Introduction