- 82 -
www.New-Leader.com
(800) 363-1771
314732-AA-B
NL5258G5/NL5300G5
Header
GPS Offsets
Editing the task controller GPS offset settings will
determine drop point of material behind chassis.
•
Select Towed or Self Propelled and enter GPS
Offset using keypad.
•
For single axle towed units, enter the distance
from the center of the hitch pin to the center of the
axle (a). Then enter the distance from the center of the
axle to the center of the spinner disc (b).
•
For self-propelled units, enter the distance
from the center of the rear axle to the center of the
spinner disc (a).
•
NOTE: For units and trailers with tandem
axles, use the center of the tandem for measurement
reference point.
• Press to continue.
Towed
Self-Propelled
System Setup Summary
•
Verify all settings are correct. Press
to
continue or
to go back and adjust as necessary.
Con
fi
guring Auxiliary Switches
•
Switches must be con
fi
gured before calibration.
•
Switchbox switches need to be mapped. Use the Display Monitor’s operations manual to map
all switches as necessary.
Controller Operations