- 55 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771
314732-AA-B
Header
Lubrication & Maintenance
Spinner Fins
Visually inspect spinner
fi
ns daily for build-
up of material and wear. Spinner discs and
fi
ns must be kept clean and polished. Even
a small build-up of material on a spinner can
signi
fi
cantly affect the spread pattern. Rough,
bent or worn
fi
ns will produce poor spread
patterns. Replace worn
fi
ns and discs as
needed. See
Fin Kit Installation Instructions
for
replacement part numbers and instructions.
Spinner De
fl
ectors
Visually inspect spinner de
fl
ectors daily for
build-up of material and damage. Clean as
needed. Even a small build-up of material on a
spinner de
fl
ector can affect the spread pattern.
If damaged, bent or otherwise, replace. See
parts manual for replacement part numbers.
Material & Hillside Dividers
Visually inspect material divider and hillside
dividers (as equipped) daily for build-up of
material and wear. Any build-up of material on
divider components can affect performance.
Clean as needed. Replace worn or damaged
parts as necessary. See parts manual
for
replacement part numbers.
Vane Assembly
Visually inspect vane assembly for buildup of
material and wear. Ensure all vanes are free
of buildup and swing freely. Clean vanes and
remove blockages as necessary. See parts
manual for replacement parts.
Figure 4 - Fin
Figure 5 - Spinner De
fl
ector
Figure 6 - Material Divider
Figure 7 - Vane Assembly