- 37 -
NL5258G5/NL5300G5
www.New-Leader.com
(800) 363-1771
314732-AA-B
Header
Insert Installation
INSERT REMOVAL/ENDGATE INSTALLATION
Remove insert and reinstall endgate, Inverted “V”, single conveyor Hillside Divider, etc. by following
applicable installation instructions in reverse order. Make sure the insert hydraulics, electrical connections
and air lines are disconnected from the spreader before removal. See “Inverted V” in spreader parts manual.
HYDRAULICS REMOVAL
Route hydraulic hoses on the spreader and the insert as shown in Figure 18.
LEFT HAND
BODY SIDE
TUBE CLAMP
RIGHT HAND
BODY SIDE
TUBE CLAMP
BIN 2 FEEDGATE
BIN 1 FEEDGATE
BIN 2
CONVEYOR
CONNECT TO
BIN 1 FEEDGATE
AFTER REINSTALLING
ENDGATE
Figure 18 - Detach M
ULT
A
PPLIER