4 Cycle time counts down from 20 to 0 and
REST
flashes once per second along
with beeps (Figure 26), meanwhile
READY
will flash in the last 3sec(Figure 27).
6 Press
START
button once enter
PAUSE
mode, Buzzer will sound for 0.5sec in every
30sec. All values are displaying on LCD and flashing in every 4sec. If training stops
for 5 minutes, buzzer sounds for 2sec and will enter sleep mode. Press
START
to
resume workout.
7 Press
STOP
or end up training, buzzer beeps 1s then displays
TOTAL TIME,
DISTANCE,CALORIES
for 30sec, and
WATT, SPEED
&
RPM
will switch to display
AVG
. &
MAX
. (Figure 18~19) each 5sec.
8 Press any
PROGRAM
key then perform the program accordingly.
5 The above 3 & 4 continue cycle counting and add 1 per each cycle, until
displays 08/08
WORK
, then will go to the end page.
Figure 24
Figure 25
Figure 26
Figure 27
3.4 I
nterval Custom:
1 Press
INTERVAL
pre-set button to select
INTERVAL CUSTOM
, press
ENTER
to enter this mode then 00/XX flashes to be set along with a
buzzer beep for 1sec. Press
UP/DOWN
buttons to set 00/XX within 1~99
Circularly. Press
ENTER
to confirm along with a buzzer beep for 1sec,
then enter into the next setting.(Figure 28)
2 The time continues lighting up,
WORK
and
0:01
will flash, press the
UP/
DOWN
buttons to set training time within 0:00~9:59 circularly (Figure
29). Press
ENTER
to confirm along with buzzer beeps 1s and
INTERVAL
CUSTOM
continues lighting up.
3 The
TIME
continues lighting up,
REST
will flash, press
UP/DOWN
to set
rest time 0:01~9:59 circularly (Figure 30). Press
ENTER
to confirm along
with buzzer beeps 1s and
INTERVAL CUSTOM
continues lighting up.
