3.5
Target time mode:
1 In Standby mode, press Target Time key and a
TIME
and target symbol
will light up, along with a long sound for 1sec.
2
TIME
value is flashing, press
UP
and
DOWN
to adjust value (Figure 35)
and press
ENTER
to confirm meanwhile buzzer beeps 1sec and a
TIME
and target symbol will light up.
3
Pre-set
TIME
value counts down,
DISTANCE, CALORIES, WATTS,
SPEEED
, RPM start to count up. (Figure 36)
4
Press
START
button once to enter into pause mode. The buzzer will
sound for 0.5sec per second within 30sec. All values are displaying on
the display and flashing in every 2sec. If training stops for 5 minutes,
buzzer sounds for 2sec and enters sleep mode. Press
START
to resume
workout.
5
No signal inputs for 30sec , buzzer sounds 1 short beep and enters sleep
mode.
6
Press
STOP
or end training,
TIME
will display total workout time;
DISTANCE
will display total workout distance;
CALORIES
will display
total consumption during workout; WATT, SPEED and RPM will switch to
display AVG. & MAX. (Figure 18~19) each 5sec.
7
Press any
PROGRAM
key then perform the program accordingly.
Figure 35
Figure 36
Figure 37
Figure 38
3.6
Target Distance Mode:
1 In Standby mode, press Target Distance key and
DISTANCE
will light up,
along with a long sound for 1sec.
2
DISTANCE
value is flashing, press
UP
and
DOWN
to adjust (Figure
37). Press
ENTER
to confirm meanwhile buzzer beeps for 1sec and
DISTANCE
lights up.
