3 Pre-set
DISTANCE
value counts down,
TIME, CALORIES, WATTS, SPEEED, RPM
starts to count up. (Figure 38)
4 Press
START
button once enter pause mode. Buzzer will sound for 0.5sec per
second within 30sec. All values are displaying on the display and flash in every
2sec. If training stops for 5 minutes, buzzer sounds 2sec and enters sleep mode.
Press
START
to resume workout.
5 No signal input for 30sec, buzzer sounds 1sec and enter sleep mode.
6 Press
STOP
key or end up training,
TIME
will display total workout time;
DISTANCE
will display total workout distance.
CALORIES
will display total
consumption during workout;
WATT, SPEED
and
RPM
will switch to display
AVG
.
&
MAX
. (Figure 18~19) each 5sec.
7 Press any
PROGRAM
key then perform the program accordingly.
Figure 39
Figure 40
Setting mode:
1 Hold on
START&ENTER
key for 2sec, buzzer will sound 1 long beep.
SPEED
will stay lit,
M/H,KM/H
flash once per second (Figure 41~42).
2 Press
UP
or
DOWN
to select
KM/H or M/H
, press
ENTER
to confirm and
then it will skip to Standby mode.
3 No action on the console for 30sec, it will go into Standby mode
OPTIONS SETTING
Figure 41
Figure 42
