New Holland WORKMASTER 35, Operator'S Manual

Page: 51 / 180

3 - CONTROLS AND INSTRUMENTS
FORWARD CONTROLS
Instrument cluster
NHIL14CT00501FA
1
1. Flasher Warning Lights - Operate when the multi-
function switch is turned on, regardless of the key
switch position. Use the flasher warning lights, road
lights and the SMV sign when traveling on public
roads, day or night.
2. Flasher Turn Lights - Operate when the multifunction
switch lever is moved upwards for right turns the right
arrow will flash and moved downwards for left turns
the left arrow will flash. The key switch has to be in
the "ON" or "START" positions.
3. Temperature Gauge - Indicates coolant temperature.
It is activated when the key switch is turned to the
"ON" position. The gauge will register cold with the
key switch in the "OFF" position. If the needle regis-
ters in the white range of the gauge, this indicates a
normal operating temperature. If the needle moves
to the red portion of the gauge, this indicates an over-
heated condition. Stop the tractor engine immedi-
ately and investigate the cause.
4. Tachometer - Registers engine rpm (Revolutions Per
Minute).
5. Hour Meter - Records the hours and portions of hours
that your tractor has been operated regardless of en-
gine RPM. Use the hour meter as a guide to deter-
mine hourly service and maintenance intervals.
6. Fuel Gauge - Indicates the amount of diesel fuel re-
maining in the tank. The gauge is activated when
the key switch is in the "ON" position. It will register
"empty" with the key switch in the "OFF" position.
7. Engine Oil Pressure Warning Light - Illuminates with
the key switch in the "ON" position and remains lit for
a short period of time after the engine is started. The
light indicates oil pressure only and goes out when
sufficient oil pressure is present at the oil sender. If
the bulb becomes lit during operation, stop the tractor
engine immediately and investigate the cause.
8. Park Brake Light - Illuminates if the park brake is en-
gaged when the key switch is turned from the "OFF"
position.
9. Battery Charge Warning Light - Illuminates when the
key switch is in the "ON" position and goes out when
the engine is started. If this bulb becomes lit dur-
ing operation, it indicates that the charging system is
not operating normally. As the battery can become
fully discharged under these conditions, the problem
should be investigated as soon as possible.
3-5