7 - MAINTENANCE
Every 600 hours
Front axle differential fluid
Changing front axle differential and final reduction gear case oil
NOTE:
The front axle differential case and final reduction
gear case oil should be changed after every 600 operating
hours.
1. Place a suitable container beneath the oil plugs. With
the oil at normal operating temperature, drain the oil by
removing the drain plugs
(1)
After the oil has drained,
reinstall the drain plugs and discard the used oil.
93100868
1
2. Remove the dipstick/filler plug
(2)
93100889
2
3. Fill the axle with
NEW HOLLAND AMBRA HYPOIDE
90
oil until the oil level is between the upper mark
(A)
,
and the lower mark
(B)
of the dipstick. Reinstall the
dipstick/filler plug.
93100902
3
4. Raise the front axle until both wheels are off the ground.
5. Tilt axle until stops are contacted.
7-28
Summary of Contents for WORKMASTER 35
