New Holland WORKMASTER 35, Operator'S Manual

Page: 149 / 180

7 - MAINTENANCE
Maxi-fuse
The main fuse is a 50 A fuse (1) located on the left-hand
side of the engine and positioned in the area of the engine
oil filter. This fuse protects the tractor's entire electrical
system.
NHIL12CT00694
1
To replace the main fuse:
1. Remove the old fuse from the fuse holder and replace.
NOTICE: Always replace this fuse with a 50 A fuse; DO
NOT increase amperage rating.
Headlight
If head lamps, fail to operate, the bulb must be replaced.
To change the bulb:
1. Open the tractor hood.
2. Disconnect wire harness connector (1) from the head-
light bulb.
3. Remove rubber boot (2) to reveal headlight retainer.
4. Release the two tabs that retain the bulb to the housing.
5. Remove the bulb from the housing. .
6. Place a new bulb in the housing, then reinstall the re-
tainer in the housing.
NOTICE: Be careful not to touch the bulb with bare fingers.
Oil from the fingers can shorten the life of bulb. Use pro-
tective cloth or glove when installing bulb.
NOTE: Replacement bulbs are dual 55/60 W filament halo-
gen : (H4 U 37R).
NHIL12CT00834AA
1
7. Reinstall rubber boot and wire harness connector.
7-41