New Holland WORKMASTER 35, Operator'S Manual

Page: 64 / 180

3 - CONTROLS AND INSTRUMENTS
RIGHT-HAND SIDE CONTROLS
Hydraulic power lift (HPL)
The HPL lever (1) is located on the right-hand control pod.
The lever controls the position of the two lift arms.
DANGER
Crushing hazard!
Make sure area is clear of all persons before
lowering equipment.
Failure to comply will result in death or serious
injury.
D0016A
To lower the lift arms, first make sure the drop rate con-
trol valve
(2) is open, then move the HPL lever forward. To
raise the lift arms, move the lever rearward. An adjustable
lower stop
(3) is located in this quadrant for returning the
lever to a preset lowering position of the hitch. An ad-
justable upper HPL control lever height stop
(4) prevents
the control lever from exceeding the lift limit and causing
the tractor hydraulic system to go over the relief valve set-
ting.
The hydraulic lift system provides accurate, smooth, and
instant hydraulic power for raising a variety of compatible
equipment whenever the engine is running. The system's
position control feature maintains the selected height or
depth of three-point linkage equipment in relation to the
tractor. When the hydraulic lift control lever is moved to a
higher or lower setting in the quadrant, the system repo-
sitions the equipment to a higher or lower position and
maintains the selected position.
NHIL12CT00681AA
1
NHIL12CT00687AA
2
Position control
Position control provides easy, accurate control of the
three-point linkage equipment which operated above the
ground, such as sprayers, rakes, mowers etc. It also pro-
vides uniform depth when using a blade or similar equip-
ment on ground level.
When operating in position control, there is a definite re-
lationship between the position of the control lever in the
quadrant and the position of the equipment. The lever
must be moved to change the position of the equipment
relative to the tractor. The system will automatically main-
tain the equipment in the selected position.
3-18