4 - OPERATING INSTRUCTIONS
NHIL12CT00891GA
5
To operate the 12 x 12 gear transmission, carry out the
following:
1. Start the engine and pull the HPL control lever
(1)
rear-
ward to lift the implement off the ground (if equipped).
2. Move the hand throttle lever
(2)
forward until the en-
gine speed is above
1500 RPM
.
3. Depress the clutch pedal
(3)
fully.
4. Place the main transmission shift lever
(4)
shuttle shift
lever
(5)
and range lever
(6)
into the desired position.
5. Depress the brake pedals
(7)
and disengage the park
brake lever
(8)
.
6. Release the clutch pedal
(3)
slowly, and the tractor will
start to move.
NOTE:
Release the clutch pedal slowly, if the clutch pedal
is released fast it will cause the tractor to move suddenly.
NOTICE:
To change the gears depress the clutch pedal
fully, and have the tractor stopped completely. The main
gear shift lever and range gear shift lever must be oper-
ated only AFTER the tractor has stopped completely. Shift
the main gear shift lever by designated “H” pattern. If the
main gear shift lever or range gear shift lever is operated
when the tractor is in motion, damage to the transmission
gears could occur.
NHIL12CT00775AA
6
4-25
Summary of Contents for WORKMASTER 35
