New Holland Boomer 41, Operator'S Manual

Page: 152 / 216

7 - MAINTENANCE
Hydraulic oil filter - Hydraulic system
NOTE: Replace the hydraulic system oil filter after the first
50 hours of operation, and then following every 300 hours
of operation thereafter.
The hydraulic system uses a spin-on type oil filter (1) , lo-
cated on the right-hand side of the tractor underneath the
operator's platform. To replace the filter :
1. Unscrew the used oil filter and discard.
2. Coat the gasket on the new filter with a film of clean oil.
Screw the filter into place until the gasket contacts the
sealing surface, then tighten the filter by hand approxi-
mately three-quarters of a turn. Do not overtighten.
3. Start the engine and check the filter for leaks.
4. Stop the engine and check the hydraulic system oil
level. Add oil if necessary.
93100934
1
7-14