New Holland Boomer 41, Operator'S Manual

Page: 103 / 216

4 - OPERATING INSTRUCTIONS
Telescoping stabilizers and flex end links ad-
justment
Telescoping stabilizers and fixed end links are standard
equipment on the tractor, the flex end links are optional
equipment.
The telescoping stabilizers
(1) use a pin and multiple hole
arrangement for easy adjustment, for side to side move-
ment of the three-point linkage.
To adjust the stabilizer, pull the pin
(2) and adjust the sta-
bilizer and insert the pin into the desired hole.
NOTE: Cycle the three point linkage through the entire
travel and check for interference with the rear tires. If
interference is present, adjust stabilizers as needed.
WARNING
Machine damage can cause accidents!
Only operate three-point equipment with both
flex ends returned to the latched position.
Failure to comply could result in death or se-
rious injury.
W0467A
The flex ends (3) on the lower lift arms are adjusted by
pushing down on the clamp (4) and sliding the ends to the
desired length. Once the implement is attached, push in
on the flex ends until the ends are in the latched position
in the arms.
NHIL13CT01019AA
4
NHIL13CT01020AA
5
4-13