New Holland Boomer 41, Operator'S Manual

Page: 168 / 216

7 - MAINTENANCE
Transmission fluid
Changing the transmission, rear axle and hydraulic system oil level
NOTE: Change the transmission, rear axle, and hydraulic system oil after every 600 hours of operation.
NOTE: During cold weather operation, tractor hydraulic oil can be changed to NEW HOLLAND AMBRA F200A
H
YDRAULIC FLUID
. The F200Aoil is a multi-viscosity oil which has improved flow characteristics in low temperatures
and can be used year round.
1. Place a suitable container beneath the transmission
and rear axle drain plugs (1) (without Mid PTO) and
(2) (With Mid PTO) to catch the used oil. With the oil
at normal operating temperature, drain the system by
removing the transmission and rear axle drain plugs.
Reinstall the plugs once the oil has drained. Discard
the used oil.
93100871
1
93100872
2
2. Remove the dipstick (3) and fill with NEW HOLLAND
A
MBRA
MULTI G 134™
HYDRAULIC TRANSMISSION OIL
hydraulic oil. The transmission is filled to the correct
level when the oil registers between the two marks on
the dipstick.
Capacity:
• Gear transmission ...............
43.0 l ( 11.4 US gal )
• HST transmission .............
43.0 l ( 11.4 US gal )
3. Reinstall the dipstick .
NOTICE: There is a common sump for the transmission,
rear axle, and hydraulic system. Therefore, extra care
should be taken to keep the oil clean
93099360
3
7-30