New Holland Boomer 41, Operator'S Manual

Page: 80 / 216

3 - CONTROLS AND INSTRUMENTS
Park brake
WARNING
Unexpected movement!
Always engage the parking brake and switch
off the engine before exiting the machine.
Failure to comply could result in death or se-
rious injury.
W0209A
NOTICE: Ensure the park brake is fully disengaged before
driving the tractor.
The park brake lever (1) is located on the left-hand side
of the operators platform. The park brake is used to apply
the rear axle brakes to prevent the tractor from moving
while parked.
To engage the park brake, lock the pedals together and
pull the park brake lever up while pressing the brake ped-
als down.
NOTE: Always engage the park brake when getting off
the tractor. If the brakes are not engaged or the operator
leaves the seat without engaging the park brake a alarm
will sound. The alarm will continue to sound for approxi-
mately ten seconds or until the park brake is engaged.
To disengage the park brake, press the brake pedals
down, push button
(2) in the end of the park brake lever
to release lever and push the lever (1) downward.
NHIL13CT01174AA
1
3-26