NEW BRUNSWICK SCIENTIFIC BIOFLO III, Manual To Operations

Page: 26 / 92

Bearing Housing Cover M1151-9444
Bearing Housing Cover O-Ring P0280-6093
Motor Assembly (1.25L, 2.5L) M1226-0700
Motor Assembly (5L) M1226-0800
Units shipped before April 1, 1996 (Mfg. No. M1226-3004, -3005, -3006)
Heater, 400W, 100/120V Units
P0620-1330
S.S.R. (240D10), 10 Amp, 100-240 VAC Unit P0400-3011
Heater, 400W, 220/240V Units P0620-1331
Units shipped after April 1, 1996
Heater, 750W, 100/120 VAC Units
P0620-1320
S.S.R. (240D45), 45 Amp, 100-240 VAC Units P0400-3151
S.S.R. (240D10), 10 Amp, 100-240 VAC Units P0400-3011
Heater, 750W, 220/240V Units P0620-1321
*NOTE: Ingold DO Probes must be used with DO Adapters.
O-RING
Description 1 1/4L 2 1/2L 5L
Head Plate P0280-8002 P0280-8062 P0280-8132
Bumper, Flat Gasket M1151-9905 M1152-9904 M1155-9902
Knob P0280-5322 Same Same
DO Port P0280-5932 Same Same
DO Port (Ingold) Washer M1016-0890 Same Same
Teflon Washer (Ingold DO) P0100-9780 Same Same
O-Ring (Ingold DO Probe) P0280-9163 Same Same
pH P0280-5912 Same Same
3/16" Port P0280-5302 Same Same
1/4" Port P0280-5322 Same Same
3/8" Port P0280-5342 Same Same
1/2" Port P0280-5912 Same Same
4.8 WARNING:
Do not attempt to change boards or electronic components unless you are a
qualified service technician. Integrated circuits are extremely susceptible
to damage from electrostatic discharge. Read and follow the precautions
in Section 4.9 before you begin.
4.9 ESD PRECAUTIONS
1. Do not remove components from their antistatic packaging until you are ready
to insert them into their sockets or install the board.
2. Before handling components or boards, touch an unpainted portion of the
system unit chassis for a few seconds.
3. Wear a wrist grounding strap, available from most electronic component
stores.
M1226-0050 19