NX1348E Icon Keypad
Page 21
Step 7
When the partitions are assigned, press the [
] key. This returns you to
Step 2 previously mentioned. At this point you may enter another user
number to assign authority level. Repeat Steps 3 - 7 until you have
assigned authority levels to all user numbers.
Step 8
Press the [#] key to exit the Assigning Authority Level Program.
OTHER KEYPAD FUNCTIONS
SETTING THE KEYPAD TONE
Step 1
Press [
]-[0]. Keypad is now in the “Adjust Tone” mode.
Step 2
Pressing the [
•
] key will make the keypad sounder go to higher tones,
pressing the [
–
] key will make the keypad sounder go to lower tones.
Step 3
When the desired tone is reached, press the [#] key to set this tone and
exit from the “Adjust Tone” mode.
CHANGE PARTITION – Optional
Step 1
Press [
]-[1].
Step 2
Press a NUMBER key between 1 and 8 to change partitions momentarily.
Step 3
If no other key is pressed, it will go back to its standard partition in ten
seconds.
Step 4
If another key is pressed, the system will remain in the new partition until
no keys have been pressed for 60 seconds.
VIEW ALARM MEMORY
Step 1
Press [
]-[3]. The zone(s) that created the last alarm will be displayed
along with the alarm icon flashing on the keypad.
Step 2
The ALARM MEMORY feature will flash those zones that created alarms
and will display steady those zones that were bypassed during the last
alarm.
