Page 18
NX1348E Icon Keypad
BYPASSING ZONES
If you wish to bypass one or more zones, this must be done while the system is in the
disarmed state. The following steps are used for bypassing zones:
Step 1
Press the [BYPASS] key.
Step 2
Enter user code, if required (optional).
The
bypass light flashes.
Step 3
Enter 1 or 2 digits indicating the zone you wish to bypass, i.e. press the
[1] key for zone 1, press [1]-[2] for zone 12.
Step 4
Press the [BYPASS] key again.
Step 5
The corresponding zone icon will illuminate indicating the zone has
been bypassed. Repeat steps 3 and 4 for any other zone(s) that need
to be bypassed.
Step 6
Press the [BYPASS] key again -or- press the [#] key to exit the Bypass
Mode. The bypass light will stop flashing upon exiting the Bypass Mode.
GROUP BYPASS
By pressing the [BYPASS] key, followed by the [0] key, then the [BYPASS] key
again, all zones that are designated as group bypass zones will be bypassed. Press
the [BYPASS] key again -or- press the [#] key to exit group bypassing.
UNBYPASSING
To manually unbypass zones, perform the bypassing procedure on a zone that is
already bypassed. The corresponding icon for that zone will go off when unbypassed.
NOTE: All zones will automatically be unbypassed each time the system is disarmed.
TURNING THE DOOR CHIME ON AND OFF
The door chime is turned on or off by pressing the [CHIME] key while the system is in
the disarmed state. If the chime is on the chime light will be illuminated. If the chime
is off, the chime light will be off. Each press of the [CHIME] key will toggle the chime
feature on/off and produce a momentary ding-dong sound.
