NX1348E Icon Keypad
Page 15
KEYPAD FUNCTIONS
ARMING YOUR SYSTEM IN THE “AWAY” MODE
AWAY is used when the user is away from the premise and wants the interior
protected.
•
Close all protected doors and windows.
Step 1
•
Ready icon will be on or flashing when all protected zones and sensors
are secure. NOTE: If any zones are bypassed, a sensor in that zone can
be violated without affecting the ready icon.
•
The security system will not arm if the not ready icon is on or flashing.
•
If the power icon is off, you have no AC power. Restore power if possible.
If not, contact your installing company listed on page 1 of this booklet for
service.
Step 2
•
Enter your 4 or 6 digit user code to arm the system.
•
The armed icon and exit light will illuminate.
•
You may now leave the building.
NOTE: The exit light will flash rapidly for the last 10 seconds of the exit delay as a
warning to the user that the exit time is about to expire. The user may wish to disarm
and rearm the system if more time is needed.
