Page 20
NX1348E Icon Keypad
Step 3
Enter the 2 digit “user number” to be assigned authority (The ready icon is
constant and the instant icon will flash).
Step 4
Icons illuminated indicate the authority levels assigned to this code. An
explanation of the icons is listed in the following table. You may toggle (turn
on/off) the authority level by pressing the number for that authority level.
ICON
AUTHORITY LEVELS IF ICON 8 IS OFF
1
Reserved (Note: Do not change if on.)
2 Arm
Only
3
Arm Only After Closing Time
4
Master Arm/Disarm (can program other codes)
5 Arm/Disarm
6 Bypass
Zones
7
Open / Close Reporting
8
If this icon is on, this code is programmed as a function code.
Do not change! Press [#] - [#] to exit.
Step 5
Press the [
] key. The ready icon is on constant and instant icon is on
constant. This moves you to the partition enable. (The user has access in
partitions that are illuminated.)
Step 6
The illuminated numbers indicate each partition where the user has
access. To change any of the partitions where the user has access, press
numbers corresponding to areas where you want to give the user access
or deny access. (Example: If zone icon #2 is lit, then the user is assigned
access to partition #2. By pressing the [2] key, the icon will go off, denying
access to partition #2. Refer to the following chart.
ICON PARTITIONS
ASSIGNED
1 Partition
1
2 Partition
2
3 Partition
3
4 Partition
4
5 Partition
5
6 Partition
6
7 Partition
7
8 Partition
8
