NX1348E Icon Keypad
Page 13
UNDERSTANDING THE ICONS & LIGHTS
ARMED ICON
The armed icon is “on” when the system is armed. The armed icon is “off” when it
is disarmed. The armed icon will flash when there has been an alarm during the
previous arm cycle.
BYPASS LIGHT
The bypass light is “on” when any zone in this keypad’s partition is bypassed. The
zone(s) that is bypassed will also be illuminated. If the bypass light is “off”, no
zones are bypassed.
CANCEL LIGHT
The cancel light will flash during an abort delay time. If a code is entered followed
by the [CANCEL] key while this light is flashing, all abortable reports will stop the
communication process. Note: The abort feature must be enabled. Entering a
code followed by the [CANCEL] key during or after an alarm report to the central
station will cause the cancel light to come on. It will stay on until the central station
has received the cancel report. Note: The cancel feature must be enabled.
CHIME LIGHT
The chime light is “on” when the chime feature is “on”; “off” otherwise.
EXIT LIGHT
The exit light is “on” during the exit delay. Please note that the light will flash during
the last 10 seconds of the exit delay as a warning that the time is running out. (The
user may want to disarm the system if the exit light is flashing in order to prevent
an alarm. The user may then re-arm the system and exit before the delay expires.)
FIRE ICON
A steady fire icon means a fire zone has been faulted. A rapidly flashing fire icon
means that a fire zone is in a trouble condition.
INSTANT ICON
The instant icon is “on” when there is no delay on your entry/exit door(s). Any time
the instant icon is “on” and the exit delay has expired, the opening of an entry/exit
door will produce an immediate alarm. The instant icon can be toggled on or off by
pressing the [Stay] key while the system is armed. When the instant icon is “off”,
the entry/exit door(s) is delayed.
