Netstor | 29
CLI Command
[Delay] ms.
Example1:
CLI>spin
Current SpinUp Attribute:
Drive Number: 1
Delay: 1024 ms
CLI>spin 512 3
New SpinUp Attribute:
Drive Number: 3
Delay: 512 ms
Current SpinUp Attribute:
Drive Number: 1
Delay: 1024 ms
• ST Command
The st command stores system configurations in flash. Since all the revised parameter setting
is temporarily stored in the working RAM, the ST command saves those parameters
permanently in flash ROM.
Syntax
CLI> st
Example:
CLI> st
CLI>
• LSD Command
The lsd command is use for show the element devices status in the expander controller. With
parameter, this command only shows the seletct device status.
Syntax
CLI> lsd [ hdd | temp | volt | pwr | con | ..]
Show SES elements information:
