Netstor | 33
CLI Command
G. You can also cancel the program step by type ‘q’.
H. If transfer OK, the transfered data is updated. Cold-start expander (Power cycle again) to
take effect.
Example:
Update procedure, use Xmodem to transfer, refer to “fdl” command for detail operation.
CLI> fdl { code | mfgb } offset[Enter]
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer and update files.
If transfer OK, the transfered data is updated. Cold-start expander (Power cycle again) to
take effect.
The following firmware and data are available in the following filename format.
(1)FW file (CODE) : sas2xfwXXXX.fw
(2)Data file (MFGB) : mfgdat6gYYYY.rom
Update 6Gb/s SAS JBOD enclosure firmware:
CLI> fdl code 0
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer sas2xfwXXXX.fw.
If transfer OK, the transfered data is updated. Cold-start expander (Power cycle again) to
take effect.
Update SAS expander data file:
CLI>fdl mfgb 0
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer mfgdat6gYYYY.rom.
If transfer OK, the transfered data is updated. Cold-start expander (Power cycle again) to
take effect.
