28 | Netstor
CLI Command
Exapnder Chip ID : 0x0221 (Ports : 28)
Exapnder Chip Revision : B3
Customer Code : 0x36
Manufacturer Data Revision : 0xB2
Wroking Time : Day00000-01:48:14
========================================
========================================
Firmware Revision Information:-
========================================
========================================
Active Firmware: Active Image
Boot Image:
Revision: 6.01.00.68 06/30/10
Firmware Family: 1 Fast Boot: No Image Address: 0x14000000
Active Image:
Revision: 6.01.00.68 06/30/10
Firmware Family: 1 Fast Boot: No Image Address: 0x14080000
Backup Image:
Revision: 6.01.00.68 06/30/10
Firmware Family: 1 Fast Boot: No Image Address: 0x14100000
• SPIN Command
The spin command defines the mode of staggering SATA drive spin-up function connected to
6Gb/s SAS JBOD enclosure. This command gives 6Gb/s SAS JBOD enclosure the ability to
spin up the disk drives sequentially or in groups, allowing the drives to come ready at the
optimum time without straining the system power supply. Staggering drive spin-up in a
multiple drive environment also avoids the extra cost of a power supply designed to meet
short-term startup power demand as well as:
Syntax
CLI> spin [ Delay(D)[ms] Num(D) ]
Expander issues the spin up the drives by [ Num] drives with
